As our name implies, we are committed to excellence.
Benchmark products are designed and built by audio enthusiasts. We are musicians, audiophiles and audio professionals who are passionate about audio quality. We also are passionate about the durability and build quality of our products. Most of our products are designed, assembled, tested, and shipped worldwide from our headquarters in Syracuse, NY, USA, where we have been located since 1985.
We are Benchmark Media Systems, Inc.
More about us
"The AHB2 bridgeable stereo amplifier ... was the topic of a recent discussion between American electrostatic panel speaker manufacturer Sound Lab’s president, Dr. Roger West, and me."
"In our discussion, he related his highly positive experience in driving even his largest, $55k Majestic 945 panels with the $7,000 pair of Benchmark Media AHB2 monoblocks, along with the $3,050 LA4 Preamplifier and factory XLR cables."
"Dr. West described the AHB2 as a class AB design using “feed-forward distortion reduction [thus removing] any possibility of pushing the margin of safety of a standard feedback loop, used in most amplifiers, into an unstable oscillatory mode.”"
"He further shared with me that “this is of most concern on powerful musical transients. The distortion of the amplifier in the balanced mode is astonishingly low even at just below the clipping level of 380 watts.”"
"The prospect of the AHB2’s specified distortion level of 0.00015% or lower when at full volume is comical at first glance, but upon actual audition the impact of the achievement is very audible from medium-high listening levels and upward."
"It was unlike any other sub-$20,000 amplifier I have auditioned."
"My audition of the Benchmark Media AHB2 amplifiers underscores the reason Dr. West is so taken by it, and confirms the design is best described as a watershed moment in the high-end audio industry."
- Constantine Soo, Dagogo
"Benchmark is a stalwart brand in pro audio, but has carved out a very respectable niche in the audiophile world with their diminutive but powerful components."
"The audiophile world sometimes looks to the professional audio world for enlightenment, especially on the digital side of things, and Benchmark Media is one of the companies that we put high on a pedestal."
"They are hardcore digital engineers freezing their asses off in upstate New York as they come up with some pretty innovative ways to get your varied digital sources sounding as much like the master tape as possible. Thank you for your service, gentlemen."
"If you really want to hear what your music sounds like in today’s streaming-driven world, this might just be the DAC that you need to test out."
- Jerry Del Colliano, Future Audiophile
"Benchmark Audio is an engineering focused company with a deep heritage in the recording studio world."
"The HPA4 is a Headphone Amplifier and Preamp that incorporates the THX-888(AAA) achromatic audio amplifier circuit that was first introduced to the world in the Benchmark AHB2 amplifier."
"To this day the AHB2 remains the lowest distortion and highest SNR amplifier on the market."
"From a listening stance it is the cleanest and most accurate delivery of sound you are likely to get with any Hi-Fi component."
"This is the direct opposite of the typical sound of tube-based technology that is awash in second harmonic distortion and noise."
"The HPA4 …offers 6 watts into 16 ohm and a whopping 11.5 Vrms into 300 Ohm headphones."
"You will not be running out of power with this device."
I used the track "Slink" from the brand-new Artemis album on Blue Note."
"It is a very dynamic driving track and the Artemis ensemble makes the most of it. The HPA4 and revealed all the sonic details of this track."
"I give the HPA4 my highest recommendation."
- Chris, Forum Administrator - DC Hi-Fi Group
Audiophiles live in the wild west. $495 will buy an "audiophile fuse" to replace the $1 generic fuse that came in your audio amplifier. $10,000 will buy a set of "audiophile speaker cables" to replace the $20 wires you purchased at the local hardware store. We are told that these $10,000 cables can be improved if we add a set of $300 "cable elevators" to dampen vibrations. You didn't even know that you needed elevators! And let's not forget to budget at least $200 for each of the "isolation platforms" we will need under our electronic components. Furthermore, it seems that any so-called "audiophile power cord" that costs less than $100, does not belong in a high-end system. And, if cost is no object, there are premium versions of each that can be purchased by the most discerning customers. A top-of-the line power cord could run $5000. One magazine claims that "the majority of listeners were able to hear the difference between a $5 power cable and a $5,000 power cord". Can you hear the difference? If not, are you really an audiophile?
At the 2023 AXPONA show in Chicago, I had the opportunity to see and hear the Hill Plasmatronics tweeter. I also had the great pleasure of meeting Dr. Alan Hill, the physicist who invented this unique device.
The plasma driver has no moving parts and no diaphragm. Sound is emitted directly from the thermal expansion and contraction of an electrically sustained plasma. The plasma is generated within a stream of helium gas. In the demonstration, there was a large helium tank on the floor with a sufficient supply for several hours of listening.
While a tank of helium, tubing, high voltage power supplies, and the smell of smoke may not be appropriate for every living room, this was absolutely the best thing I experienced at the show!
- John Siau
We have added an "Audio Calculators" section to our webpage. Click "Calculators" on the top menu to see more like these: